The Brownells Gas Block Roll Pin Punch Kit allows easier installation and removal of the gas tube roll pin on the AR-15/AR-308 firearms system. Mfg: Brownells SPECS: Includes 3 punches, 5/64" Roll Pin Starter Punch, 5/64" Roll Pin Punch, 5/64" Roll Pin...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with...
Read more
from Brownells
(IN Stock)
Parallel ground tips to better fit the bottom of the slot, where the screw is strongest, for greater torque transfer. Fit a wide selection of factory screws. #6 X-L has a 12" long shank for buttstock screws/bolts. Because of the end use of this...
Read more
from Brownells
(IN Stock)
If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Irwin Industrial Tool Co. SPECS: Those taps marked ** are...
Read more
from Brownells
(IN Stock)
We supply our taps in Carbon steel whenever possible. If one should break off in a hole, the remains can be "shattered" with a punch for easy removal. All numbers in chart are shown as Nominal Size, Tap Drill Size, Clearance Drill Size. Mfg: Reiff &...
Read more
from Brownells
(IN Stock)
Sized to fit the metric roll pins found on the Beretta 92 Series pistols. Mfg: Brownells SPECS: Set includes four HSS punches. Tip dia. 3mm (.11-4"), 2mm (.074"), and 1.5mm (.055"). Starter punch, 1.5mm dia. tip.
Read more
from Brownells
(IN Stock)
A harder-than-nylon but softer-than-steel punch for drifting fixed sights without damage. Mfg: Brownells SPECS: Steel handle, replaceable brass tip. 3�" (9.5cm) long.
Read more
from Brownells
(IN Stock)
We're tickled as all get out to offer our Fixed-Blade, Gunsmith's Screwdriver Set designed and developed by gunsmiths for those gunsmiths who love solid, fixed-blade screwdrivers that fit their gun screws right - and simply won't have it any other way!...
Read more
from Brownells
(IN Stock)
Brownells .146"-48 Taps. Click Here for screws. Mfg: Brownells SPEC: 1 tap per package.
Read more
from Brownells
(IN Stock)
3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and...
Read more
from Brownells
(IN Stock)
NECK TURNING FEELER GAGE SET Mfg: Sinclair International
Read more
from Brownells
(IN Stock)
The Bondhus T-Handle set is an excellent choice for frequent use in the gun room and reloading bench. The cushioned grip handles make them extremely comfortable to use and provide positive control. The 10-piece set includes wrenches from 3/32 inch to...
Read more
from Brownells
(IN Stock)
All cases should be case mouth deburred after trimming or neck turning. Tool is double-ended with standard 45 degree flutes that debur/chamfer the inside and outside mouth of the case. Fits 50 BMG case mouths. Mfg: L.E. Wilson
Read more
from Brownells
(IN Stock)
All cases should be case mouth deburred after trimming or neck turning. Tool is double-ended with standard 45 degree flutes that debur/chamfer the inside and outside mouth of the case. Will fit case mouths ranging from .17 caliber to .60 caliber, Rifle...
Read more
from Brownells
(IN Stock)
The Brownells Replaceable Pin Punch Kit for Glocks lets you completely disassemble any Glock Pistol. Punch out the locking block pin, trigger housing pin, and trigger pin. Also depresses the magazine floorplate catch for removal of the plate for...
Read more
from Brownells
(IN Stock)
These punches are specifically designed for the installation, removal, and adjustment of front and rear handgun sights. Made of brass so they will not mar the sight or the gun if you slip. Unique triangular punch faces and heavy-duty bodies make them...
Read more
from Brownells
(IN Stock)
The increasing popularity of VLD style bullets has led RCBS to offer a 22 degree VLD Debur tool. The 22 degree angle allows the bullet to be seated into the case without damaging the boat-tail and tuining accuracy. The VLD debur tool can be used as is, ...
Read more
from Brownells
(IN Stock)
These industrial hex wrench sets are a must have for the range box or the workbench. These Bondhus sets have ball driver ends on the long end of the wrench for using at angles of up to 25-degrees. All wrenches come in a special holder that locks the...
Read more
from Brownells
(IN Stock)
The Grace USA Gunsmith 24 Bit Magnetic Tip Screwdriver Set is made soecifically for the gunsmith trade. The high quality set includrs eleven Grave USA Parallel Hollow Ground slotted bits that are designed the way they should be. Each one is precisely...
Read more
from Brownells
(IN Stock)
Ever been at the range or in the field and really needed a good set of tools on-hand to keep your range day going right? This Obsidian Arms Standard 8-Piece Punch Set is a must-have for any range bag, since it includes many of the popular punches...
Read more
from Brownells
(IN Stock)
Fix It Sticks Ratchet Locking Hex Drive with 15 Bits and Bracket Offers unmatched portability, functionality and versatility. Ratchet Locking Hex T Wrench and 15 bits are held in a molded bracket. Includes 15 different bits: 3mm hex 4mm hex 5mm hex T6...
Read more
from Brownells
(IN Stock)
Ideal for illuminating hard-to-see areas of the chamber, receiver and barrel interior. A bright white LED puts out 15, 000 mcd brightness housed in a 5 flex neck that is attached to a machined brass housing.
Read more
Switch to grid view